Instructions for installing SAW 0.4
Full documentation available at http://saw.tuxfamily.org



01.	Install all the packages from 0.4 repo.



02.	Add the realtime kernel to your lilo.conf and run lilo.
	
	a)	add the following code to the end of /etc/lilo.conf :

			image = /boot/vmlinuz-2.6.24.7-rt20
			  root = /dev/XXX
			  label = SAW
			  read-only
		
		where XXX is your "/" partition.  It should be the same as the
		"root = " line for the default entry near the bottom of
		lilo.conf.  If you want SAW to be the default boot option, add
		"default = SAW" near the top of lilo.conf.

	b)	run `/sbin/lilo`



03.	Set the rtirq script to run at boot.

	a)	add the following code to /etc/rc.d/rc.local :

			if [ -x /etc/rc.d/rc.rtirq ]; then
			    sh /etc/rc.d/rc.rtirq start
			fi



04.	Set the das_watchdog script to run at boot.

	a)	add the following code to /etc/rc.d/rc.local :

			if [ -x /usr/sbin/das_watchdog ]; then
			    echo "Executing das_watchdog..."
			    /usr/sbin/das_watchdog > /dev/null &
			fi



05.	We want to increase inotify availability.

	a)	add the following line to /etc/sysctl.conf :

			fs.inotify.max_user_watches = 524288



06.	Reboot, and select "SAW" at the lilo prompt. Enjoy!



ChangeLog:
+--------------------------+
Thu Oct 22 20:09:00 CDT 2008
Modified for SAW 0.4
+--------------------------+
Sun Oct 19 14:45:00 CDT 2008
Modified for SAW 0.3
+--------------------------+
Tue Oct 14 16:30:00 CDT 2008
Added fs.inotify.max_user_watches step
+--------------------------+
Sat Oct 11 13:17:00 CDT 2008
SAW 0.1 prepared, initial writing.